Skip to main content

Get-HPiLOHealthReport

Description​

Gets a health report from the target HP iLO address.

Requirements​

  • PowerShell v5
  • Desktop edition of PowerShell
  • PowerShellGet 2.0+
  • .NET Runtime 4.7.2+
  • iLO Version 3+

Usage​

  • If .NET 4.7.2 or higher is not installed, install it.
    • Will exit due to failure to install.
    • Will exit due to reboot requirement after installation.
    • Will continue if .NET is installed without a necessary reboot.
  • Install and import the HPEiLOCmdlets module.
  • Get all of the network interfaces on the host machine.
  • Start looping through the network interfaces.
    • Get the IPv4 addresses assigned to the interface.
    • Start looping through the IP addresses.
      • Convert the IP address to binary.
      • Find the number of host bits based on the prefix length.
        • 32-bit address - x bits prefix = (32 - x) host bits 
          192.168.159.0/24
          32 - 24 = 8
          192.168.159.0 = 11000000101010001001111100000000
          Prefix (24 bits) --> 110000001010100010011111
          Host (8 bits) --> 00000000
      • Get the binary representation of the network ID.
      • Get the binary representation of the host ID.
      • Get the total number of possible hosts using string multiplication and binary to decimal conversion.
      • Create an object to store the minimum and maximum values of each octet.
      • Start a loop starting at 1 and ending at the total number of available hosts.
        • Get the next possible binary host ID in the loop.
        • Get the full IP address of the host ID that we just gathered.
        • Start a loop starting at 0 and ending before 4.
          • Get a substring of the octet from the gathered IP address based on the current loop iteration (x * 8).
          • Get the decimal representation of the octet binary.
          • Replace the min or max of the octet in the min/max store with this octet if it is applicable.
  • Format the min/max ranges to comply with what the HPEiLOCmdlets module requires (e.g., 192.168.22.0-192.168.23.255 becomes 192.168.22-23.0-255).
  • If an address was passed into the script, only find the iLO at the target address. Otherwise, use the discovered ranges.
  • Return the iLO health objects.
    • Attempt to connect to the iLO.
      • If the connection was successful, set the ConnectionStatus property of the object to 'Connected' and populate the object.
      • If the connection was unsuccessful, set the ConnectionStatus property of the object to the last error message.

Gets the health status of the iLO at IP address '10.1.1.1'.

.\Get-HPiLOHealthReport.ps1 -Address 10.1.1.1 -Username "ilouser" -Password $securePassword

Gets the health status of all iLOs reachable from the subnets of the host machine's NICs.

.\Get-HPiLOHealthReport.ps1 -Username "ilouser" -Password $securePassword

Parameters​

ParameterRequiredDefaultTypeDescription
AddressFalseStringThe address of the iLO device to get the health report for.
UsernameTrueStringThe username used to authenticate with the target iLO(s).
PasswordTrueSecureStringThe password used to authenticate with the target iLO(s).

Output​

System.Management.Automation.PSCustomObject

Name                       MemberType   Definition
----                       ----------   ----------
Equals                     Method       bool Equals(System.Object obj)
GetHashCode                Method       int GetHashCode()
GetType                    Method       type GetType()
ToString                   Method       string ToString()
AgentlessManagementService NoteProperty string AgentlessManagementService=Ready
BatteryStatus              NoteProperty string BatteryStatus=OK
BIOSHardwareStatus         NoteProperty string BIOSHardwareStatus=OK
ConnectionStatus           NoteProperty string ConnectionStatus=Connected
FanRedundancy              NoteProperty string FanRedundancy=Redundant
FanStatus                  NoteProperty string FanStatus=OK
Hostname                   NoteProperty string Hostname=
HostSystemInformation      NoteProperty HSI HostSystemInformation=HPE.iLO.Response.HSI
IP                         NoteProperty string IP=10.1.1.1
ManagementProcessor        NoteProperty MP ManagementProcessor=HPE.iLO.Response.MP
MemoryStatus               NoteProperty string MemoryStatus=OK
NetworkStatus              NoteProperty string NetworkStatus=OK
PowerSuppliesMismatch      NoteProperty string PowerSuppliesMismatch=No
PowerSuppliesRedundancy    NoteProperty string PowerSuppliesRedundancy=Redundant
PowerSuppliesStatus        NoteProperty string PowerSuppliesStatus=OK
ProcessorStatus            NoteProperty string ProcessorStatus=OK
Status                     NoteProperty StatusType Status=OK
StatusInfo                 NoteProperty object StatusInfo=null
StorageStatus              NoteProperty string StorageStatus=Warning
TemperatureStatus          NoteProperty string TemperatureStatus=OK

HPE.iLO.Response.HSI

Name         MemberType Definition
----         ---------- ----------
Equals       Method     bool Equals(System.Object obj)
GetHashCode  Method     int GetHashCode()
GetType      Method     type GetType()
ToString     Method     string ToString()
cUUID        Property   string cUUID {get;set;}
NICS         Property   HPE.iLO.Response.HSI_NIC[] NICS {get;set;}
ProductID    Property   string ProductID {get;set;}
SerialNumber Property   string SerialNumber {get;set;}
SP           Property   string SP {get;set;}
SPN          Property   string SPN {get;set;}
UUID         Property   string UUID {get;set;}
Virtual      Property   HPE.iLO.Response.HSI_Virtual Virtual {get;set;}

HPE.iLO.Response.MP

Name        MemberType Definition
----        ---------- ----------
Equals      Method     bool Equals(System.Object obj)
GetHashCode Method     int GetHashCode()
GetType     Method     type GetType()
ToString    Method     string ToString()
BBLK        Property   string BBLK {get;set;}
EALERT      Property   string EALERT {get;set;}
ERS         Property   string ERS {get;set;}
FWRI        Property   double FWRI {get;set;}
HWRI        Property   string HWRI {get;set;}
IPM         Property   string IPM {get;set;}
PN          Property   string PN {get;set;}
PWRM        Property   string PWRM {get;set;}
SN          Property   string SN {get;set;}
SSO         Property   string SSO {get;set;}
ST          Property   string ST {get;set;}
UUID        Property   string UUID {get;set;}

Log Files​

.\Get-HPiLOHealthReport-log.txt
.\Get-HPiLOHealthReport-error.txt